Gear reducer motor is widely used, are machinery and equipment indispensable power equipment, especially in the printing machinery, corrugated machinery, packaging machinery, transportation machinery, food machinery, box machinery, automatic storage, warehouse, three-dimensional parking equipment, textile, dyeing and finishing, chemical and other devices.
The type of gear motor: high power gear motors; coaxial helical gear reducer motor; parallel shaft helical gear reducer motor; spiral bevel gear motor; YCJ series gear motors; Worm geared motors.
To determine the model of a gear motor, need to determine the following parameters:
1, to determine the mechanical running speed, this speed calculation of the gear reducer motor slowdown ratio (deceleration ratio = into the speed of shaft / Output shaft speed = motor speed / mechanical requirements of speed);
2, the calculation load of torque, this torque to select geardeceleration of the motor output (reference gear reducer motor manufacturers to provide output torque table ") to determine the model of the gear reducer motor;
3, to determine the additional features of the gear motor, for example, power-off brakes, power brakes, frequency, shrinking box.shell material. Some additional functions can provide only a specific factory, such as the G Series gear motors, it provides all the additional features, so when selected in consultation with the supplier.
Maintenance and installation of the reducer
Gear reducer motor installation and maintenance of points to note are:
1, before use in advance to confirm the gear motor appearance is broken? Whether there is leakage?

2, please confirm in advance to buy the gear reducer motor specifications and design specifications are consistent?
3, first to confirm the gear motors using the voltage. If the voltage instability dissecting mounted regulator.
4, make sure the fixed base, loose in order to avoid the operation of transmission

5,The use of pulleys, sprockets, couplings and other accessories required in accordance with the relevant provisions is actually installed.
6, gear deceleration motor drive operation, the rated current of not more than the motor nameplate marked current value.
7, the gear reducer motor machine body has been placed in the lubricating grease, 12,000 hours free replacement of oil.

8, please refer to the surrounding temperature, humidity, pH, and other issues.

9, the gear reducer motor to adapt to the environment of -10 degrees to +40 degrees, humidity 90% indoor 1000 meters above sea level.

10 accordance with the correct installation, maintenance or operation, may cause the gear motor serious injury.

11, repair or demolition of the recognition of an external power supply completely removed from the gear motor.

12, safety protection devices required does the installation, to ensure absolute operational safety.

13, the motor must be grounded line, please refer to the distribution laws and regulations.

14, be sure to confirm all installation parts and transmission parts fixed and correct, and then the OK to start the gear motor.

15 If the gear reducer motor with inverter drive at low speed, the need to install an independent auxiliary cooling fan.

16, single-phase reduction still remains in its capacitor after the power failure of the motor part of the charge, the first discharge or side terminals grounded.